Lenovo A319 firmware stock rom to unbrick your phone
Hi,
UPDATE: I have already tried and tested this firmware and it is working properly if you are only using NCKBox. If you dont have an NCKBox do not proceed. You might softbrick your phone, but dont worry it is still recoverable.
This firmware is for Lenovo A319, this is only a ROM dump. I havent tested it yet, so if you would like to beta test it proceed and download the the file. If the file is working please leave a comment in the comment box.
This firmware is not yet rooted, you can use your favorite rooting application for PC such as vRoot/iRoot/Kingoroot or you can use an APK file which is Kingroot to root your device.
You can fix the following issue in your phone: 1. Bootloop 2. Damaged System UI 3. TP Upgrade only 4. Dead phone but it is detected in computer 5. Remove Gmail Account / Password / Pattern Lock (Alternative Way) 6. Privacy Protection Password Lock up
"DOWNLOAD THESE FILES" Firmware Here -->Lenovo A319 Part 1
Firmware Here -->Lenovo A319 Part 2 Firmware Here -->Lenovo A319 Part 3 Firmware Here -->Lenovo A319 Part 4 Firmware Here -->Lenovo A319 Part 5 Firmware Here -->Lenovo A319 Part 6 VCOM Driver -->VCOM Manual Alternative Driver --> AutoInstaller
SPFlashTool --> LatestVersion
"Use WinRar or 7zip to extract the firmware" "Extract the files to your desired folder" "If you encounter error in flashtool, use different version of it."
"I suggest to use 32bit Windows OS for compatibility of the driver" "You can also use 64bit version, just disable driver signing or driver signature before installing the driver."
Installing Driver with AutoInstaller
First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. Follow these steps:
Turn off your phone (always powered off is a must)
Press and hold volume up or down, or you can simple press the two button.
Insert your USB cable without releasing the VOLUME button(s).
In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
Repeat 1 to 4 if it does not detect your phone.
If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^
Reference Video using Driver Auto Installer (watch in HD)
Installing Manually using VCOM Driver
When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver.
2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Video Installing VCOM Driver (please watch in HD)
"Your Phone must be turned off when you are ready to connect and flash your phone"
Flashing
1. Launch FlashTool (flash_tool.exe)
2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)
Reference Video Using FlashTool version 5.xxx (watch in HD)
3. After you load the file, UNCHECK PRELOADER and DSP only (Never flash preloader and DSP if available in firmware), press Press Download to Flash your Phone.
4. After you press Download Follow these steps
Turn off your phone (always powered off is a must)
Press and HOLD volume UP or Down or you can simply press it simultaneously
Insert your USB cable without releasing the VOLUME button(s).
Keep on repeating until Flashtool detected your phone.
5. If successfully detected just wait until the progress bar reaches 100%. If your phone did not automatically turn on after flashing, remove battery and USB cable. And put back your battery then turn on your device.
"Hard reset your phone after flashing"
Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Latest version of Flashtool
PMT_CHANGED error occur when firmware is not compatible with your phone. Sometimes your phone has a different board version. You should check it too, if your firmware is compatible with your phone.
Try Firmware upgrade
Try different version of flashtool
Try to set Format All + Download
Or try Manual Format first then Download.
If you encounter Privacy Protection Password:
Open flash_tool.exe
Load the scatter file
Goto Format Tab
Click on Format except bootloader
Press Play/Start Icon
Then remove battery
Insert the battery again
Insert the USB cable (you should hear a beep on your computer, and it should proceed in formatting.)
After done formatting proceed in Flashing.
Goto Download tab (I assume that you loaded the scatter file already)
Uncheck PRELOADER (this is very important)
Press Download
Then remove battery
Insert Battery again
Insert the USB cable (you should hear a beep on your computer, and it should proceed in flashing or downloading the firmware in your phone.)
Power ON the phone after flashing.
Restore your IMEI.
For Invalid IMEI (Does not work in MT6571 SoC):
Root your phone via vRoot/iRoot/Kingoroot or your preferred method in rooting you device. Your phone must be rooted first.
Download MTKDroidsTool version 2.4.8 and version 2.5.3
Enable your USB debugging in Developer Option (you also need this in rooting your phone via PC)
Okay in your PC -- Open MTKDroidstool version 2.4.8 (Mtkdroidstool.exe) first. Make sure that you connected your phone already.
Still in Mtkdroidstool -- Click ROOT
In your phone -- A pop up dialogue will appear, just grant or allow it.
In your PC -- If root shell is granted/allowed, Click in IMEI/NVRAM tab. If it is grayed out this is the time when you open the MTKDroidsTool version 2.5.3.
Enter your original IMEI
Click Replace
Reboot your phone
FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your phone must be rooted first) 1. Make sure you have MTKDROIDSTOOL version 2.4.8 or version 2.5.3 (you can search it in google) 2. In MTKDroidstool (I assume you launch the tool) -- Click in Root. 3. In your device -- After you press Root, you need to authorize it. A pop up message will appear. Click Allow/Authorize depends on your root application. 4. In MTKDroidsTool -- Click in IMEI/NVRAM, then click in RESTORE. 5. Then look for the folder where you extracted the NVRAM files. 6. Check if the Baseband is fixed. And if the IMEI is fully restored. 7. If Baseband is still Unknown and IMEI is invalid. Then you need to hard reset first your phone. 8. After hard reset your baseband should be fixed already. (base on my experience) 9. If your baseband is fixed sometimes the IMEI is still invalid. So you need to restore the IMEI. Available link for download
Alcatel One Touch 4033E stock rom firmware to unbrick your phone
Hi,
This firmware is for Alcatel One Touch 4033E, I already tried and tested this file.
This firmware is not yet rooted, you can use your favorite rooting application for PC such as vRoot/iRoot/Kingoroot or you can use an APK file which is Kingroot to root your device.
You can fix the following issue in your phone: 1. Bootloop 2. Damaged System UI 3. TP Upgrade only 4. Dead phone but it is detected in computer 5. Remove Gmail Account / Password / Pattern Lock (Alternative Way) 6. Privacy Protection Password Lock up
"DOWNLOAD THESE FILES" Firmware Here -->Alcatel One Touch 4033e Part 1 Firmware Here -->Alcatel One Touch 4033e Part 2 Firmware Here -->Alcatel One Touch 4033e Part 3 Firmware Here -->Alcatel One Touch 4033e Part 4
VCOM Driver -->VCOM Manual Alternative Driver --> AutoInstaller
SPFlashTool --> LatestVersion
"Use WinRar or 7zip to extract the firmware" "Extract the files to your desired folder" "If you encounter error in flashtool, use different version of it."
"I suggest to use 32bit Windows OS for compatibility of the driver" "You can also use 64bit version, just disable driver signing or driver signature before installing the driver."
Installing Driver with AutoInstaller
First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. Follow these steps:
Turn off your phone (always powered off is a must)
Press and hold volume up or down, or you can simple press the two button.
Insert your USB cable without releasing the VOLUME button(s).
In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
Repeat 1 to 4 if it does not detect your phone.
If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^
Reference Video using Driver Auto Installer (watch in HD)
Installing Manually using VCOM Driver
When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver.
2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Video Installing VCOM Driver (please watch in HD)
"Your Phone must be turned off when you are ready to connect and flash your phone"
Flashing
1. Launch FlashTool (flash_tool.exe)
2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)
Reference Video Using FlashTool version 5.xxx (watch in HD)
3. After you load the file FILL CUSTPACK, MOBILE_INFO, and other file. UNCHECK PRELOADER only (Never flash preloader and if available in firmware), If you cannot proceed in flashing without PRELOADER include PRELOADER. Proceed at your own risk, press Press Download to Flash your Phone.
4. After you press Download Follow these steps
Turn off your phone (always powered off is a must)
Press and HOLD volume UP or Down or you can simply press it simultaneously
Insert your USB cable without releasing the VOLUME button(s).
Keep on repeating until Flashtool detected your phone.
5. If successfully detected just wait until the progress bar reaches 100%. If your phone did not automatically turn on after flashing, remove battery and USB cable. And put back your battery then turn on your device.
"Hard reset your phone after flashing"
Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Latest version of Flashtool
PMT_CHANGED error occur when firmware is not compatible with your phone. Sometimes your phone has a different board version. You should check it too, if your firmware is compatible with your phone.
Try Firmware upgrade
Try different version of flashtool
Try to set Format All + Download
Or try Manual Format first then Download.
If you encounter Privacy Protection Password:
Open flash_tool.exe
Load the scatter file
Goto Format Tab
Click on Format except bootloader
Press Play/Start Icon
Then remove battery
Insert the battery again
Insert the USB cable (you should hear a beep on your computer, and it should proceed in formatting.)
After done formatting proceed in Flashing.
Goto Download tab (I assume that you loaded the scatter file already)
Uncheck PRELOADER (this is very important)
Press Download
Then remove battery
Insert Battery again
Insert the USB cable (you should hear a beep on your computer, and it should proceed in flashing or downloading the firmware in your phone.)
Power ON the phone after flashing.
Restore your IMEI.
For Invalid IMEI (Does not work in MT6571 SoC):
Root your phone via vRoot/iRoot/Kingoroot or your preferred method in rooting you device. Your phone must be rooted first.
Download MTKDroidsTool version 2.4.8 and version 2.5.3
Enable your USB debugging in Developer Option (you also need this in rooting your phone via PC)
Okay in your PC -- Open MTKDroidstool version 2.4.8 (Mtkdroidstool.exe) first. Make sure that you connected your phone already.
Still in Mtkdroidstool -- Click ROOT
In your phone -- A pop up dialogue will appear, just grant or allow it.
In your PC -- If root shell is granted/allowed, Click in IMEI/NVRAM tab. If it is grayed out this is the time when you open the MTKDroidsTool version 2.5.3.
Enter your original IMEI
Click Replace
Reboot your phone
FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your phone must be rooted first) 1. Make sure you have MTKDROIDSTOOL version 2.4.8 or version 2.5.3 (you can search it in google) 2. In MTKDroidstool (I assume you launch the tool) -- Click in Root. 3. In your device -- After you press Root, you need to authorize it. A pop up message will appear. Click Allow/Authorize depends on your root application. 4. In MTKDroidsTool -- Click in IMEI/NVRAM, then click in RESTORE. 5. Then look for the folder where you extracted the NVRAM files. 6. Check if the Baseband is fixed. And if the IMEI is fully restored. 7. If Baseband is still Unknown and IMEI is invalid. Then you need to hard reset first your phone. 8. After hard reset your baseband should be fixed already. (base on my experience) 9. If your baseband is fixed sometimes the IMEI is still invalid. So you need to restore the IMEI. 10. To restore IMEI follow Step 1-4, but you should not restore. You should fill the IMEI then click REPLACE. Then reboot your phone. VOILA! I hope the phone is fully working :)
I hope this tutorial help you. Please drop a comment if something is not clear to you.
Alcatel One Touch Star 6010x firmware stock rom to unbrick your phone
Hi,
This firmware is for Alcatel One Touch Star 6010x, I already tried and tested this file.
This firmware is not yet rooted, you can use your favorite rooting application for PC such as vRoot/iRoot/Kingoroot or you can use an APK file which is Kingroot to root your device.
You can fix the following issue in your phone: 1. Bootloop 2. Damaged System UI 3. TP Upgrade only 4. Dead phone but it is detected in computer 5. Remove Gmail Account / Password / Pattern Lock (Alternative Way) 6. Privacy Protection Password Lock up
"DOWNLOAD THESE FILES" Firmware Here -->Alcatel One Touch Star 6010x
VCOM Driver -->VCOM Manual Alternative Driver --> AutoInstaller
SPFlashTool --> LatestVersion
"Use WinRar or 7zip to extract the firmware" "Extract the files to your desired folder" "If you encounter error in flashtool, use different version of it."
"I suggest to use 32bit Windows OS for compatibility of the driver" "You can also use 64bit version, just disable driver signing or driver signature before installing the driver."
Installing Driver with AutoInstaller
First try the Alternative Driver, which is the AutoInstaller. Just open the install.exe then it will automatically install the driver. To fully check if the driver is correctly installed in your computer. Follow these steps:
Turn off your phone (always powered off is a must)
Press and hold volume up or down, or you can simple press the two button.
Insert your USB cable without releasing the VOLUME button(s).
In your computer, it must detect your phone and it will install the MTK Preloader or Mediatek USB VCOM driver.
Repeat 1 to 4 if it does not detect your phone.
If MTK Preloader/Mediatek USB VCOM Driver is installed you are good to go in flashing your phone ^_^
Reference Video using Driver Auto Installer (watch in HD)
Installing Manually using VCOM Driver
When installing it manually your phone must be turned off, then connect it to your computer/laptop while pressing VOLUME UP or VOLUME DOWN. This will detect and look for the driver.
1. This is the first time that you will connect your phone and it will search for the correct driver.
2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.
3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.
Video Installing VCOM Driver (please watch in HD)
"Your Phone must be turned off when you are ready to connect and flash your phone"
Flashing
1. Launch FlashTool (flash_tool.exe)
2. In Flashtool, Click on Scatter-Loading, and load your scatter file. (see example below)
Reference Video Using FlashTool version 5.xxx (watch in HD)
3. After you load the file, FILL CUSTPACK, MOBILE_INFO, and other file. UNCHECK PRELOADER only (Never flash preloader and if available in firmware), If you cannot proceed in flashing without PRELOADER include PRELOADER. Proceed at your own risk, press Press Download to Flash your Phone.
4. After you press Download Follow these steps
Turn off your phone (always powered off is a must)
Press and HOLD volume UP or Down or you can simply press it simultaneously
Insert your USB cable without releasing the VOLUME button(s).
Keep on repeating until Flashtool detected your phone.
5. If successfully detected just wait until the progress bar reaches 100%. If your phone did not automatically turn on after flashing, remove battery and USB cable. And put back your battery then turn on your device.
"Hard reset your phone after flashing"
Some workarounds:
If you encounter PMT_Changed error here is what you do:
In Latest version of Flashtool
PMT_CHANGED error occur when firmware is not compatible with your phone. Sometimes your phone has a different board version. You should check it too, if your firmware is compatible with your phone.
Try Firmware upgrade
Try different version of flashtool
Try to set Format All + Download
Or try Manual Format first then Download.
If you encounter Privacy Protection Password:
Open flash_tool.exe
Load the scatter file
Goto Format Tab
Click on Format except bootloader
Press Play/Start Icon
Then remove battery
Insert the battery again
Insert the USB cable (you should hear a beep on your computer, and it should proceed in formatting.)
After done formatting proceed in Flashing.
Goto Download tab (I assume that you loaded the scatter file already)
Uncheck PRELOADER (this is very important)
Press Download
Then remove battery
Insert Battery again
Insert the USB cable (you should hear a beep on your computer, and it should proceed in flashing or downloading the firmware in your phone.)
Power ON the phone after flashing.
Restore your IMEI.
For Invalid IMEI (Does not work in MT6571 SoC):
Root your phone via vRoot/iRoot/Kingoroot or your preferred method in rooting you device. Your phone must be rooted first.
Download MTKDroidsTool version 2.4.8 and version 2.5.3
Enable your USB debugging in Developer Option (you also need this in rooting your phone via PC)
Okay in your PC -- Open MTKDroidstool version 2.4.8 (Mtkdroidstool.exe) first. Make sure that you connected your phone already.
Still in Mtkdroidstool -- Click ROOT
In your phone -- A pop up dialogue will appear, just grant or allow it.
In your PC -- If root shell is granted/allowed, Click in IMEI/NVRAM tab. If it is grayed out this is the time when you open the MTKDroidsTool version 2.5.3.
Enter your original IMEI
Click Replace
Reboot your phone
FOR DAMAGED BASEBAND or UNKNOWN BASEBAND (Your phone must be rooted first) 1. Make sure you have MTKDROIDSTOOL version 2.4.8 or version 2.5.3 (you can search it in google) 2. In MTKDroidstool (I assume you launch the tool) -- Click in Root. 3. In your device -- After you press Root, you need to authorize it. A pop up message will appear. Click Allow/Authorize depends on your root application. 4. In MTKDroidsTool -- Click in IMEI/NVRAM, then click in RESTORE. 5. Then look for the folder where you extracted the NVRAM files. 6. Check if the Baseband is fixed. And if the IMEI is fully restored. 7. If Baseband is still Unknown and IMEI is invalid. Then you need to hard reset first your phone. 8. After hard reset your baseband should be fixed already. (base on my experience) 9. If your baseband is fixed sometimes the IMEI is still invalid. So you need to restore the IMEI. 10. To restore IMEI follow Step 1-4, but you should not restore. You should fill the IMEI then click REPLACE. Then reboot your phone. VOILA! I hope the phone is fully working :)
I hope this tutorial help you. Please drop a comment if something is not clear to you.
Android 2 3 6 Gingerbread Upgrade Your Samsung Galaxy S Wifi 5 0 Galaxy Player 5 0 International Firmware
YP-G70 G70ZCKPA Android 2.3.6 Gingerbread Upgrade Your Samsung Galaxy S Wifi 5.0 ( Galaxy Player 5.0 International ) Firmware
The Android 2.3.6 Gingerbread firmware update for Samsung Galaxy S Wifi 5.0 that also works for Samsung Galaxy Player 5.0 International version is now available for to upgrade your Galaxy player devices. This firmware with build number YP-G70 G70ZCKPA is released for Chinese users but includes all international languages, so international users can also use this ROM. This firmware is stabler than before and rooting is also available.
The Rooted version Samsung Galaxy S wifi 5.0 added RJs custom kernel for Galaxy Player 5.0 international (YP-G70) R9.
Making root:
1. install rjs custom kernel 2. Get root with script by DooMLoRD_v4
Google account (ive done it after device rooting) 1. Download Android Stock Apps 2.3.7 folder from here 2. Install GoogleServicesFramework.apk There was Market in my device cause I didnt wipe it before/after flashing ...cant attach apk for Gtalk which ive used, but its easy to find it if U need it Background updating of mail and IM services is working.
Grab the ROM and follow the step by step procedure on how to upgrade your Samsung Galaxy S Wifi 5.0 ( Galaxy Player 5.0 International to Rooted Android 2.3.6 Gingerbread. Jump up to the thread started
