Saturday, October 1, 2016
How to Install Samsung Galaxy S4 I9505 Jelly Bean Firmware I9505XXUENA1 4 3 Update Guide
How to Install Samsung Galaxy S4 I9505 Jelly Bean Firmware I9505XXUENA1 4 3 Update Guide
How to Install Samsung Galaxy S4 I9505 Jelly Bean Firmware I9505XXUENA1 4.3 Update Guide,Download and install the latest I9505XXUENA1 4.3 Jelly Bean Firmware on Samsung Galaxy S4 GT-I9505 (Snapdragon) Smartphone. Samsung recently started rolling out an OTA update the firmware. However, the firmware is currently released only for Germany (T-Mobile). Hope the firmware will hit other part of the world soon. The Galaxy S4 I9505 was released with Android 4.2.2 Jelly Bean and receiving Android 4.3 Jelly Bean from the month of October. We have already covered many Android 4.3 Jelly Bean firmware for Galaxy S4 GT-I9505 and here we have the latest I9505XXUENA1 4.3 Jelly Bean firmware. If you yet to update your device to this latest firmware, then update the same using our simple tutorial below. Continue reading the guide to install the firmware manually through Odin. You can also check out other firmware for the device- Android 4.3 Jelly Bean for GT-I9505.
If your Galaxy S4 I9505 already running on the Android 4.3 Jelly Bean, then you can only expect few bug fixes and performance enhancement with this latest firmware update. So, want to update your Galaxy S4 I9505 to the latest XXUENA1 Android 4.3 Jelly Bean firmware? To install in official way, either you can go for OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.3 XXUENA1 firmware on your Galaxy S4 I9505 through Odin.
Must Check: Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNA6 Android 4.4.2 KitKat Firmware
Samsung Galaxy S4 GT-I9500 How TO Root I9500XXUEMK8 Android 4.3 Jelly Bean Firmware
How To Root R950VXUBMK3 Android 4.3 Jelly Bean Firmware Running on US Cell Samsung Galaxy Note 2
How To Root L710VPUCMK3 Android 4.3 Jelly Bean Firmware Running on Samsung Galaxy S3
Samsung Galaxy I9205 Mega 6.3 JB Firmware How to Install I9205XXUCML8 4.2.2 Update Guide
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 I9505XXUENA1 official firmware on Galaxy S4 I9505.
Must Check: Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNA6 Android 4.4.2 KitKat Firmware
Important Note:
“The firmware is released only for the Samsung Galaxy S4 GT-I9505 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.
Android 4.3 Jelly Bean I9505XXUENA1 Official Firmware Download List
Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy S4 GT-I9505 model. Germany (T-Mobile): I9505XXUENA1_I9505DTMEMJ8_DTM.zip
[Firmware for rest of the countries and carrier will be added here when available]
Previous Firmware Build:
Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNA6 Android 4.4.2 KitKat Firmware.Samsung Galaxy S4 GT-I9500 How TO Root I9500XXUEMK8 Android 4.3 Jelly Bean Firmware
How To Root R950VXUBMK3 Android 4.3 Jelly Bean Firmware Running on US Cell Samsung Galaxy Note 2
How To Root L710VPUCMK3 Android 4.3 Jelly Bean Firmware Running on Samsung Galaxy S3
Samsung Galaxy I9205 Mega 6.3 JB Firmware How to Install I9205XXUCML8 4.2.2 Update Guide
Pre-Requisites:
- Check battery percentage, your device should have at least 60% battery power
- Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
- Backup important data and settings to external storage- follow this guide
- Install USB driver for your device on your computer- Download Samsung USB Driver
Points to be noted:
- If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
- Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
- After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy S4 I9505 through Odin:
- Download Android 4.3 XXUENA1 Firmware for Galaxy S4 I9505 from the above list
- Download Odin 3.09
- Switch off your phone and boot Galaxy S4 I9505 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
- Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
- Now connect your Galaxy S4 I9505 to your computer via USB cable
- In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
- Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
- Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
- In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9505XXDLJ5_I9505ODDDLI7_INU.tar.md5)
- Now, click on the Start button to begin the installation process, wait few moments.
- Once completed, you would see “PASS!” message in ID:COM port having green background
- Your phone should automatically reboot after completion
- You can now disconnect your phone from computer
- Finish
Congratulations! your Galaxy S4 I9505 is now updated to the latest and official Android 4.3 Jelly Bean firmware. Hope you successfully completed the installation guide. If you followed everything as mentioned in the above tutorial, then your your Galaxy S4 should now running on the latest Android 4.3 Jelly Bean build version XXUENA1. You can confirm the firmware update details from Settings-About Phone. You can contact with us using the comment form below, if you find any problem with the above tutorial and download link and also share your experience with us.
Available link for download
