Click download: install

Showing posts with label install. Show all posts

Tuesday, November 1, 2016

Samsung Galaxy S4 Zoom How to Install C101XWUANA1 Android 4 2 2 Jelly Bean Firmware How to Install

C101XWUANA1 Android 4.2.2 Jelly Bean Firmware Last Updated on 10-Feb-2014. A new official firmware released for the owners of Samsung Galaxy S4 Zoom SM-C101 which is XWUANA1 4.2.2 Jelly Bean Firmware. The firmware recently rolled out by Samsung. The Galaxy S4 Zoom was released with Android 4.2.2 Jelly Bean and already received few regular firmware update. There is no news about any further android version update at this moment. We have already covered many firmware update for Galaxy S4 Zoom and here you can now download and install the latest C101XWUANA1 4.2.2 Jelly Bean Firmware. If you own the device and not yet updated this latest firmware, then update your device using our simple tutorial below. You can flash the firmware manually through Odin by following the below guide. Want to check out other firmware for the device, then check- official firmware for SM-C101.

As the Galaxy S4 Zoom C101 released with Android 4.2.2 Jelly Bean and yet received Android 4.3 Jelly Bean or later android version, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy S4 Zoom C101 to the latest XWUANA1 Android 4.2.2 Jelly Bean firmware? To install in official way, either you can go for OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.2.2 XWUANA1 firmware on your Galaxy S4 Zoom C101 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy S4 Zoom SM-C101 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on S4 Zoom dows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.2.2 Jelly Bean C101XWUANA1 Official Firmware Download List

Morocco: C101XWUANA1_C101OJVANA1_FWD.zip
Morocco (MWD): C101XWUANA1_C101OJVANA1_MWD.zip
Iraq: C101XWUANA1_C101OJVANA1_MID.zip
Saudi Arabia: C101XWUANA1_C101OJVANA1_WTL.zip
South Africa (Vodafone): C101XWUANA1_C101OJVANA1_XFV.zip[Firmware for rest of the countries and carrier will be update here when available]

Previous Firmware Build:

Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNA6 Android 4.4.2 KitKat Firmware.
Samsung Galaxy S4 GT-I9500 How TO Root I9500XXUEMK8 Android 4.3 Jelly Bean Firmware
How To Root R950VXUBMK3 Android 4.3 Jelly Bean Firmware Running on US Cell Samsung Galaxy Note 2
How To Root L710VPUCMK3 Android 4.3 Jelly Bean Firmware Running on Samsung Galaxy S3
Samsung Galaxy I9205 Mega 6.3 JB Firmware How to Install I9205XXUCML8 4.2.2 Update Guide

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 C101XWUANA1 official firmware on Galaxy S4 Zoom C101.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S4 Zoom C101 through Odin:

Samsung Galaxy S4 Zoom How to Install C101XWUANA1 Android 4.2.2 Jelly Bean Firmware How to Install

Download Android 4.2.2 XWUANA1 Firmware for Galaxy S4 Zoom C101 from the above list
Download Odin 3.09
Switch off your phone and boot Galaxy S4 Zoom C101 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy S4 Zoom C101 to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: C101XXDLJ5_C101ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congrats! you have completed the tutorial to update Android 4.2.2 Jelly Bean official firmware on Galaxy S4 Zoom SM-C101. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy S4 Zoom should now running on the latest Android 4.2.2 Jelly Bean build version XWUANA1. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below.

Available link for download

Lubuntu 15 10 post install configuration

After Lubuntu 15.10 was successfully installed, there were still some tweaks I needed to make to be fully satisfied. Feel free to use or ignore as you see fit:

Run system update via Start > System Tools > Software Updater

Set up video card

Add/Remove applications:
sudo apt-get install chromium-browser default-jdk libreoffice thunderbird keepassx audacity git xscreensaver xscreensaver-gl-extra p7zip-full shutter avidemux
sudo apt-get remove gnumeric abiword firefox pidgin sylpheed xpad
sudo apt-get install libdvd-pkg
sudo dpkg-reconfigure libdvd-pkg

Right-click time in bottom-right corner > Select Digital Clock Settings > Change clock format from %R to %l:%M %p

Change the screen saver: Start > Preferences > Screensaver

Change the launch bar:
Right-click the File Manager icon in bottom left corner > Select Application Launch Bar settings > add Thunderbird, Leafpad, KeepassX and LXTerminal

Change the desktop wallpaper:
Search for a desired wallpaper and save it to your hard drive. Right-click desktop and select Desktop Preferences > Appearance tab > Click button next to current Wallpaper image and browse for your new wallpaper.

Change the default view:
Open file manager > Edit > Preferences > General tab > set Default View to Detailed List View

Set Thunderbird to reply to messages above quoted text:
Open Thunderbird > Edit > Preferences > Advanced tab > General tab > Config Editor... button > search for default.reply_on_top and set the value to 1

Add printer:
For my HP Officejet Pro 8100, I needed the HP drivers:
sudo apt-get install hplip printer-driver-hpijs hplip-gui && sudo hp-setup
Start > System Tools > Printers --> right-click --> Set as Default

Install Chromium plugins:
https://www.eff.org/https-everywhere
https://chrome.google.com/webstore/detail/adblock-plus/cfhdojbkjhnklbpkdaibdccddilifddb
https://chrome.google.com/webstore/detail/wappalyzer/gppongmhjkpfnbhagpmjfkannfbllamg
https://chrome.google.com/webstore/detail/clear-cache/cppjkneekbjaeellbfkmgnhonkkjfpdn
https://chrome.google.com/webstore/detail/ghostery/mlomiejdfkolichcflejclcbmpeaniij
https://chrome.google.com/webstore/detail/recent-bookmarks/olndffocioplakeilhkgenfgdincjlpn

Edit keyboard shortcuts: sudo leafpad ~/.config/openbox/lubuntu-rc.xml

after the  line add:

<keybind key="C-l">
<action name="Execute">
<command>xscreensaver-command -lock</command>
</action>
</keybind>

then, replace:


<keybind key="A-Print">
<action name="Execute">
<command>scrot -u -b</command>
</action>
</keybind>

with:


<keybind key="A-Print">
<action name="Execute">
<command>shutter -a -e</command>
</action>
</keybind>

then, replace:


<keybind key="Print">
<action name="Execute">
<command>scrot</command>
</action>
</keybind>

with:


<keybind key="Print">
<action name="Execute">
<command>shutter -f -e</command>
</action>
</keybind>

...then save and close the XML file

Configure shutter:
create a folder called screenshots in your home directory
open Start > Accessories > Shutter
from the menu, select Edit > Preferences
Main side-tab:
Filename: %Y%m%d-%NN
Directory: screenshots
Actions side-tab:
Open with: place checkmark next to Built-in Editor
Behavior side-tab:
uncheck Display pop-up notification after taking a screenshot
click the Close button and main shutter window to save the changes

Logout and log back in to test your changes (Window+L will lock your screen, Print Screen will bring up the entire screen in shutter, and +Print Screen will bring up the active window in shutter)

Available link for download

Samsung Galaxy S4 Active Mini GT I8580 How to Install I8580XXUANB1 Android 4 2 2 Jelly Bean Firmware

Samsung Galaxy S4 Active Mini GT-I8580- How to Install I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware,I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware Last Updated on 24-Feb-2014. Samsung Galaxy S4 Active Mini GT-I8580 users can now update their device with the latest XXUANB1 Android 4.2.2 Jelly Bean official firmware. Samsung started rolling out an OTA update about the firmware. The latest firmware build version is I8580XXUANB1. However, the firmware is currently out for Russia. Hope the firmware will hit other part of the world soon. The device recently released with Android 4.2.2 Jelly Bean and already get firmware update. Here we have the latest available official firmware update for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware manually through Odin. You can also check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

As the Galaxy S4 Active Mini I8580 already running on Android 4.2.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this latest firmware update. So, want to update your Galaxy S4 Active Mini I8580 to the latest XXUANB1 Android 4.2.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.2.2 XXUANB1 firmware on your Galaxy S4 Active Mini I8580 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy S4 Active Mini GT-I8580 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.2.2 Jelly Bean I8580XXUANB1 Official Firmware Download List

Russia: SER-I8580XXUANB1-20140224093755.zip

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build:

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.2.2 I8580XXUANB1 official firmware on Galaxy S4 Active Mini I8580.

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S4 Active Mini I8580 through Odin:

Download Android 4.2.2 XXUANB1 Firmware for Galaxy S4 Active Mini I8580 from the above list
Download Odin 3.09
Switch off your phone and boot Galaxy S4 Active Mini I8580 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy S4 Active Mini I8580 to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: I8580XXDLJ5_I8580ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

That’s all the above steps to update Android 4.2.2 Jelly Bean official firmware on Galaxy S4 Active Mini GT-I8580. Hope you successfully done the update process. If you followed everything as mentioned above, then your your Galaxy S4 Active Mini should now running on the latest Android 4.2.2 Jelly Bean build version XXUANB1. You can confirm the firmware update details from Settings-About Phone. You can contact with us using the comment form below, if you find any problem with the above tutorial and download link and also share your experience with us.

Available link for download

Samsung Galaxy Note 3 Neo LTE SM N7505L How to Install N7505LUBUANB1 Android 4 3 Jelly Bean Firmware

Samsung Galaxy Note 3 Neo LTE SM-N7505L- How to Install N7505LUBUANB1 Android 4.3 Jelly Bean Firmware,N7505LUBUANB1 Android 4.3 Jelly Bean Firmware Last Updated on 25-Feb-2014. You can now update the UBUANB1 4.3 Jelly Bean official firmware on Samsung Galaxy Note 3 Neo SM-N7505L. Samsung recently started rolling out an OTA update about the firmware. The Galaxy Note 3 Neo N7505L recently released by Samsung with Android 4.3 Jelly Bean out of the box and this is the first official firmware update for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below step by step guide will help you to download and flash the latest N7505LUBUANB1 Android 4.3 Jelly Bean Firmware manually through Odin.

As the Galaxy Note 3 Neo N7505L already running on Android 4.3 Jelly Bean, you can expect few bug fixes and performance enhancement with this latest firmware update.

So, want to update your Galaxy Note 3 Neo N7505L to the latest UBUANB1 Android 4.3 Jelly Bean firmware? For official way, either you can go for OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.3 UBUANB1 firmware on your Galaxy Note 3 Neo N7505L through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Note 3 Neo SM-N7505L model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.3 Jelly Bean N7505LUBUANB1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Note 3 Neo SM-N7505L model.
Peru: PET-N7505LUBUANB1-20140225213115.zip
Dominican Republic (Claro): CDR-N7505LUBUANB1-20140225213023.zip
[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 N7505LUBUANB1 official firmware on Galaxy Note 3 Neo N7505L.

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 Neo N7505L through Odin:

Download Android 4.3 UBUANB1 Firmware for Galaxy Note 3 Neo N7505L from the above list
Download Odin 3.09
Switch off your phone and boot Galaxy Note 3 Neo N7505L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Note 3 Neo N7505L to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7505LXXDLJ5_N7505LODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

So, you have just finished the tutorial to update Android 4.3 Jelly Bean official firmware on Galaxy Note 3 Neo SM-N7505L. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.3 Jelly Bean build version UBUANB1. You can verify the firmware update details from Settings-About Phone. So, enjoy all the new features and improvements on your device and don’t forget to share your experience in the comment below.

Available link for download

Samsung Galaxy Note 3 SM N900 How to Install N900XXUDNB2 Android 4 4 2 KitKat Firmware

Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNB2 Android 4.4.2 KitKat Firmware,N900XXUDNB2 Android 4.4.2 KitKat Firmware Last Updated on 25-Feb-2014. You can now update the latest XXUDNB2 4.4.2 KitKat official firmware on Samsung Galaxy Note 3 SM-N900. Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version is N900XXUDNB2. However, the firmware is currently released for Russia. Hope the firmware will hit other part of the world soon. The Galaxy Note 3 was released with Android 4.3 Jelly Bean and started received firmware update soon after the release. The device already get KitKat firmware update and here we have the latest official Android 4.4.2 KitKat firmware. If you own the device and yet to update this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install the N900XXUDNB2 Android 4.4.2 KitKat Firmware manually through Odin.

Root N900XXUDNB2

Root N900XXUDNB2 Android 4.4.2 Firmware on Galaxy Note 3 SM-N900- Simple Tutorial

Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNB2 Android 4.4.2 KitKat Firmware

Android 4.4.2 KitKat is definitely a great update for the Samsung Galaxy Note 3 N900 users as they are eagerly waiting for great features that coming with this latest update.

Android 4.4.2 KitKat comes with many new features than the previous Android 4.3 Jelly Bean, some includes- Camera shortcut on lockscreen, White icons in status bar, Performance improvements, Transparent status bar, Improved keyboard layout in landscape orientation, Select between the stock messaging app or Hangouts for SMS and MMS, Select between TouchWiz or other launchers through settings, Wireless printing, Updated Google apps and many more.
So, want to update your Galaxy Note 3 N900 to the latest XXUDNB2 Android 4.4.2 KitKat firmware? There are two official way to update the firmware, either check and update via OTA (over the air) from your phone settings, go to Settings-General-About-Software Update or download and update through the Samsung Kies utility. However, if you are looking for a manual way to update the latest Android 4.4.2 XXUDNB2 firmware on your Galaxy Note 3 N900 via Odin, then follow this step by step tutorial.

Important Note:

“The firmware is released only for the Samsung Galaxy Note 3 SM-N900 model, so don’t try this in any other android device. Check your device model number from Settings-General-About. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.4.2 KitKat N900XXUDNB2 Official Firmware Download List

Russia (MegaFon): N900XXUDNB2_N900MGFDNB3_MGF.zip
Russia: N900XXUDNB2_N900SERDNB2_SER.zip | Link2
Kazakhstan: N900XXUDNB2_N900OXEDNB2_SKZ.zip | Link2
Ukraine (Kyivstar): N900XXUDNB2_N900OXEDNB2_SEK.zip | Link2

[Firmware for rest of the countries will be added here when available]

Previous Firmware Build

Samsung Galaxy Win GT-I8552- How to Install I8552XXANB1 Android 4.1.2 Jelly Bean Firmware

Samsung Galaxy S4 Active Mini GT-I8580- How to Install I8580XXUANB1 Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy Tab 3 10.1 GT-P5210- How to Install P5210ZCUANA1 Android 4.2.2 Jelly Bean Firmware

Samsung Galaxy Grand 2 Duos SM-G7102- How to Install G7102XXUANB2 Android 4.3 Jelly Bean Firmware

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-General-Developer Options (As the Developer options are hidden by default on all Android device running on Android 4.2 or up, So go to Settings-General-About on your Galaxy Note 3 and tap Build Number for 7 times to visible the Developer options.) See the image above
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.4.2 N900XXUDNB2 official firmware on Galaxy Note 3 N900.

How to Update Android 4.4.2 KitKat Official Firmware on Galaxy Note 3 N900 via Odin:

Download Android 4.4.2 XXUDNB2 Firmware for Galaxy Note 3 N900 from the above list
Download Odin 3.09
Switch off your phone and boot Galaxy Note 3 N900 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Note 3 N900 to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N900XXDLJ5_N900ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congrats! You have finish updating your device. Hope you successfully completed the tutorial to update Android 4.4.2 KitKat XXUDNB2 official firmware on Galaxy Note 3 SM-N900. If you followed everything as mentioned in the above tutorial, then your device should now running on the latest Android 4.4.2 KitKat build version XXUDNB2. You can verify the firmware update details from Settings-General-About. If you have any queries, feel free to contact with us using the comment form below and also share how you find the tutorial.

Available link for download

Samsung Galaxy Win GT I8552 How to Install I8552XXANB1 Android 4 1 2 Jelly Bean Firmware

Samsung Galaxy Win GT-I8552- How to Install I8552XXANB1 Android 4.1.2 Jelly Bean Firmware,

I8552XXANB1 Android 4.1.2 Jelly Bean Firmware Last Updated on 24-Feb-2014. Samsung Galaxy Win GT-I8552 users can now update their device with the latest XXANB1 4.1.2 Jelly Bean Official Firmware. Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version is I8552XXANB1. The Galaxy Win is a mid range Android Smartphone by Samsung, released in the month of April 2013 with Android 4.1.2 Jelly Bean and soon after release the device started receiving regular firmware update. We have already covered many firmware update here at NasirTech and here we have the latest firmware for the device. If you own the device and not yet updated this latest firmware, then update your device using our simple tutorial below. The below guide will help you to download and install the I8552XXANB1 Android 4.1.2 Jelly Bean Firmware manually through Odin.

Samsung-Galaxy-Win-GT-I8552 Firmware Update Guide

As the Galaxy Win released with the Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy Win I8552 to the latest XXANB1 Android 4.1.2 Jelly Bean firmware? To install in official way, either you can go for OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 XXANB1 firmware on your Galaxy Win I8552 through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Win GT-I8552 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.1.2 Jelly Bean I8552XXANB1 Official Firmware Download List

Indonesia: I8552XXANB1_I8552OLBANB1_XSE.zip | Link2

Thailand: I8552XXANB1_I8552OLBANB1_THL.zip

Philippines (Sun): XTC-I8552XXANB1-20140224095131.zip | Link2

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Samsung Galaxy S4 Zoom How to Install C101XWUANA1 Android 4.2.2 Jelly Bean Firmware,

Samsung Galaxy Hennessy SCH-W789 Flip Phone- How to Insta W789KEUANA1 Android 4.1.2 Jelly Bean Firmware.

Samsung Galaxy Mini GT-S5570I- How to Install S5570IAIMJ1 Android 2.3.6 Gingerbread Firmware

Samsung Galaxy S3 GT-I9300T- How to Install I9300TDUUGNA4 Android 4.3 Jelly Bean Firmware.

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 I8552XXANB1 official firmware on Galaxy Win I8552.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Win I8552 through Odin:

Samsung Galaxy Win GT-I8552- How to Install I8552XXANB1 Android 4.1.2 Jelly Bean Firmware

Download Android 4.1.2 XXANB1 Firmware for Galaxy Win I8552 from the above list
Download Odin 3.09
Switch off your phone and boot Galaxy Win I8552 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Win I8552 to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: I8552XXDLJ5_I8552ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congrats! you have completed the tutorial to update Android 4.1.2 Jelly Bean official firmware on Galaxy Win GT-I8552. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Win should now running on the latest Android 4.1.2 Jelly Bean build version XXANB1. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below.

Available link for download

How to Flash Install Official Firmware on Samsung Galaxy S7 S7 Edge

This is a flashing guide for Samsung galaxy S7 & S7 edge if you are looking to restore your device software, upgrade, or downgrade the android version on your phone.
You can follow this tutorial to flash any model of the galaxy S7/S7 edge (Global, Verizon, T-Mobile, AT&T, Sprint, US Cellular, Canada, ...).

Requirements :

Official firmware file for your device model number, download it from SamMobile or Samsung-Updates
Latest version of Odin3 tool. (Link below)
Samsung Smart Switch or Samsung mobile USB driver. (Links below)
Charged Samsung galaxy S6 or S6 edge.
USB cable and Windows PC.

Steps :

Backup your pictures and files
Download, install Samsung driver or Smart Switch.
Download, unzip firmware file and odin.
Double-click odin3 tool, click BL and navigate to BL_xx, AP and navigate to AP_xx, CP and navigate to CP_xx, and CSC and navigate to HOME_CSC_xx.
Create screen lock PIN.
Go to settings, Lock screen, Protect encrypted data or secure startup and select require PIN.
Put your phone into download mode (Vol Down+Home+Power) then Vol Up.

Connect your device to the computer and wait until you get a sign in ID:COM section and "Added" in message box.

Click Start and wait few minutes until you see "PASS!" in odin.
If your phone stuck in bootloop, reboot your device into recovery mode then choose factory reset.

Done!

YT video link : https://www.youtube.com/watch?v=EFV9WkZ9FfY

Notes :

Do not disconnect the USB cable while flashing process is running.
Install Samsung Mobile Driver or Samsung Smart Switch if you dont see a sign in Odin.
Flash your device at your own risk.
Flashing official/stock firmware wont increase the binary flash nor KNOX WARRANTY VOID counter and wont cancel the devices warranty.

Downloads :

Odin3 v3.11.1 HERE
Latest Samsung Mobile Driver HERE
Latest Samsung Smart Switch HERE

Available link for download

Samsung Galaxy Pop E220S Android 4 1 2 Jelly Bean Firmware How to Install E220SKSANA2 Update Guide

Samsung Galaxy Pop E220S Android 4.1.2 Jelly Bean Firmware How to Install E220SKSANA2 Update Guide,

Samsung Galaxy Pop SHV-E220S (South Korea) users can now update their device with the latest official E220SKSANA2 Android 4.1.2 Jelly Bean firmware. Samsung recently rolled out the firmware. The Galaxy Pop was released in the month of January previous year (2013) with Android 4.1.2 Jelly Bean and this is the second official firmware update for the device. Samsung is yet to release Android 4.2.2 Jelly Bean or any further android version for the device. If you own the device and not yet updated this latest firmware, then update the same using our simple tutorial below. The below guide will help you to download and install E220SKSANA2 4.1.2 Jelly Bean Firmware manually through Odin. You can check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

As the Galaxy Pop already running on the Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy Pop E220S to the latest KSANA2 Android 4.1.2 Jelly Bean firmware? To install in official way, either you can go for OTA update as mentioned above or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 KSANA2 firmware on your Galaxy Pop E220S through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Pop SHV-E220S model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.1.2 Jelly Bean E220SKSANA2 Official Firmware Download List

South Korea: E220SKSANA2_E220SSKTANA2_SKT.zip

Previous Firmware Build:

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be Noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 E220SKSANA2 official firmware on Galaxy Pop E220S.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Pop E220S through Odin:

Download Android 4.1.2 KSANA2 Firmware for Galaxy Pop E220S from the above list
Download Odin 3.09
Switch off your phone and boot Galaxy Pop E220S into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Pop E220S to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: E220SXXDLJ5_E220SODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congrats! you have just completed the tutorial to update Android 4.1.2 Jelly Bean official firmware on Galaxy Pop SHV-E220S. Hope you successfully done the update process. If you followed everything as mentioned in the above tutorial, then your Galaxy Pop should now running on the latest Android 4.1.2 Jelly Bean build version KSANA2. You can confirm the firmware update details from Settings-About Phone. If you stuck in any point or find any issue with the download link, then feel free to contact with us using the comment form below.

Available link for download

How to Install I9100XXLPB Android 4 0 3 Ice Cream Sandwich Upgrade for Samsung Galaxy S II

The newly build Android 4.0.3 Ice Cream Sandwich firmware version with build number I9100XXLPB recently leaks. This guide will show you how to manually upgrade your Samsung Galaxy S2 GT-I9100 to Android 4.0.3 Ice Cream Sandwich with this beta version released. The official ICS 4 for SGS2 rumored to be release this coming March 2012. So, until the waiting seems goes more exciting for that official release lets try it out first to have some twist of ICS on our devices. The I9100XXLPB ICS 4.0.3 has just been online at sammobile.com. This new build is more stable than the previous leaks. This can be used for international version or unbranded version of Galaxy S II.

I9100XXLPB
Firmware details:
Model: GT- I9100
Android version: Ice Cream Sandwich 4.0.3
Kernel version: 3.0.15-I9100XXLPB-CL99600
se.infra@SEI-44#3
PDA: I9100XXLP8
CSC: I9100OXXLP5
PHONE: I9100XXLP8
Build Date: January 29, 2012
Stock ROM Download:http://hotfile.com/dl/144937425/4dd44e7/I9100XXLPB_I9100OXXLP5_OXX.rar.html

I9100XXLPB Android 4.0.3 Ice Cream Sandwich Samsung Galaxy S II firmware upgrade

I9100XXLPB Android 4.0.3 Ice Cream Sandwich Samsung Galaxy S II firmware upgrade

Some Changes.
* New enhance user interface that looks like 3D effects in scrolling.
* Battery life much better and less drains than previous one.
* Task, Touch, Face unlock is still the same from previous build LP6
* GPS, 3G and 2G data works.
* Camera works.
* This version still looks the same as of Gingerbread unlike the ICS ASOP based, but is more stable and faster than others.

Bug Fixes:
* Home Button not working from LP6 now fixed.

Disclaimer: Droidangel shall not be held responsible if anything happens to your device by following this procedure, You may proceed at your own risk.

How to manually flash the I9100XXLPB stock ROM using Odin downloader tool.
1. Download the I9100XXLPB stock ROM then extract it after download.

2. Grab Odin v1.83 or v1.85.
3. Run Odin.
4. Load the binary files:
PDA button load the - I9100_CODE_I9100XXLPB_CL99600_REV02_user_low_ship. tar
Phone button load the - MODEM_I9100XXLPB_REV_02_CL1101286.tar
CSC button load the - GT-I9100-MULTI-CSC-OXXLP5_RST.tar

Install I9100XXLPB Android 4.0.3 Ice Cream Sandwich Upgrade for Samsung Galaxy S II

5. Set the SGS II in Download Mode: Volume Down+Center + Power Lock buttons at the same time.
6. When the phone display in downloading mode, connect it to PC.
7. Hit "START" button once Odin recognize that the device is already connected.
8. Wait until the flashing successfully completes.

Do factory reset, *2767*3855# or via recovery mode (Button press Volume UP+Center+Power).Then select Wipe Data/Factory Reset.
Reconfigure your APN settings if network connection failure occurred.
Change it to your prepared language in your regions

Available link for download

Samsung Galaxy Mini GT S5570I How to Install S5570IAIMJ1 Android 2 3 6 Gingerbread Firmware

Samsung Galaxy Mini GT-S5570I- How to Install S5570IAIMJ1 Android 2.3.6 Gingerbread Firmware,

S5570IAIMJ1 Android 2.3.6 Gingerbread Firmware Last Updated on 24-Feb-2014. Download and install the latest AIMJ1 Android 2.3.6 Gingerbread official firmware on Samsung Galaxy Mini GT-S5570I Smartphone. Samsung recently started rolling out an OTA update about the firmware. The latest firmware build version is S5570IAIMJ1. The Galaxy Mini S5570I was released back in the year 2011 with Android 2.2 Froyo and receiving Android 4.2.2 Jelly Bean from the middle of 2012. There is no news about any Jelly Bean update for the device. If you not yet updated your device to this latest official firmware, then you can now update the same using our simple tutorial below. The below guide will help you to download and install the S5570IAIMJ1 Android 2.3.6 Gingerbread Firmware manually through Odin. You can also check latest available firmware for your device through OTA (over the air) from Settings-About Phone-Software Update.

Samsung Galaxy Mini GT-S5570I Firmware Update Guide

If your Galaxy Mini S5570I already running on the Android 2.3.6 Gingerbread, then you can only expect few bug fixes and performance enhancement with this latest firmware update. It is always recommended to update device to the latest available firmware.

So, want to update your Galaxy Mini S5570I to the latest AIMJ1 Android 2.3.6 Gingerbread firmware? For official process, either you can go for OTA update by following the above mentioned path or download and update firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 2.3.6 AIMJ1 firmware on your Galaxy Mini S5570I through Odin.

Important Note:

“The firmware is released only for the Samsung Galaxy Mini GT-S5570I model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 2.3.6 Gingerbread S5570IAIMJ1 Official Firmware Download List

[Firmware for rest of the countries and carrier will be added here when available]

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 2.3.6 S5570IAIMJ1 official firmware on Galaxy Mini S5570I.

How to Install Android 2.3.6 Gingerbread Official Firmware on Galaxy Mini S5570I through Odin:

Samsung Galaxy Mini GT-S5570I- How to Install S5570IAIMJ1 Android 2.3.6 Gingerbread Firmware

Download Android 2.3.6 AIMJ1 Firmware for Galaxy Mini S5570I from the above list
Download Odin 3.09
Switch off your phone and boot Galaxy Mini S5570I into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy Mini S5570I to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: S5570IXXDLJ5_S5570IODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congratulations, your Galaxy Mini S5570I is now updated to the latest and official AIMJ1 Android 2.3.6 Gingerbread firmware. Hope you successfully completed the update process. If you followed everything as mentioned in the above above tutorial, then your your Galaxy Mini should now running on the latest Android 2.3.6 Gingerbread build version AIMJ1. You can confirm the firmware update from Settings-About Phone. So, explore the latest update on your device and share your experience with us and also let us know how you find the above tutorial using the comment section below.

Available link for download

How to install Two instagram in to one Device

Instwogram is an app that lets you have two active Instagram accounts on your Android device. How? Easy, basically by using a clone of Instagram itself, in which you can also log in to the official Instagram app.

Instwogram doesnt offer any additional features compared to the classic Instagram. This means that you wont find anything new in it, just the possibility of having two accounts open at the same time, uploading pictures to both or either one of them.

Instwogram is a pretty useful app for anyone who has two Instagram accounts; it lets you upload your pictures without having to log in and out all the time.

Features Of Instwogram :

Now you can post pictures.
Also you can post videos
Follow and Un-follow easily.
Add location to posts.
You can also register new account.
All new click-able links feature.
Download videos and pictures in one click.
Direct sharing of posts.

Requirements For Intwogram :

Android version 2.2+
Root access only if you want to use Add-on.

Download

Available link for download

How to Install CM10 1 android 4 2 1 Jelly Bean ROM on Samsung Galaxy S3 I9300

In this tutorial we will guide you step-by-step on how to install CM10.1 Android 4.2.1 Jelly Bean ROM on Samsung Galaxy S3 I9300.

CyanogenMod 10.1 Android v4.2.1 Jelly Bean provides an immense exhilaration to those by Samsung Galaxy S3 I9300 users desiring to enjoy the features of Jelly Bean 4.2.1 ROM. CyanogenMod, also known as simply CM, is undoubtedly the most greatly acknowledged unauthorized Android firmware, and day-by-day they are increasing their compatibility with numerous old and freshly arriving Android devices from different manufacturers., including our Samsung Galaxy S3 I9300. Many reviews show that CyanogenMod provides much more facilities than the official Android firmware. Installing CyanogenMod 10.1 Android 4.2.1 Jelly Bean on your Samsung Galaxy S3 I9300 will enable its user to sustain in the Jelly Bean environment.

So in this tutorial we will be showing you an installation guide regarding using CyanogenMod 10.1 Jelly Bean 4.2.1 ROM on Samsung Galaxy S3 I9300. Just follow the simple steps given below:

Disclaimer

This tutorial will definitely work when using Samsung Galaxy S3 I9300 only. While working of it on others is not yet confirmed. On applying this installation to another model or device may give an unwanted result. While applying this update we will not be responsible if anything occurs to your device, so continue at your own risk.

Pre-Requisite

For successful completion of this rooting process charge your phone up to a minimum of 75% battery.
You must take a back-up of all your personnel items and other impotent data, such as Call Logs, SMS, Contacts, Audios, Images, Videos, APN (Access Point Names) settings, Bookmarks, MMS settings, on your phone.
One must install a custom recovery image particularly for his Android device. To do this, ClockworkMod Recovery should be downloaded using the Internet.
If you have not, then you must unlock your Android device’s Bootloader. But due to unlocking of Bootloader, your Android device may lose its official Warranty. So to overcome this, download fastboot from Internet.

Steps for installing CM10.1 Android 4.2.1 Jelly Bean ROM on Samsung Galaxy S3 I9300

Step 1

From your Android device disconnect & remove the memory card and insert it in your Computer using a card reader. You must not use USB cable, since CyanogenMod do not work properly through USBs.

Step 2

Now do repartition of memory card, by just doing right click on the existing partition, choose Resize option, and then apply the sufficient amount of space towards your new partition. Make your new partition as your primary partition of Ext4 file system. Press the Apply option & remove your memory card now.

Step 3

Using the Internet, download: CM10.1 Android 4.2.1 Jelly Bean ROM for Samsung Galaxy S3 I9300.zip file and Google Apps in your Computer. Again reinsert it in the PC and then copy the above downloaded zip file in a folder named as “root” under your SD Card. Don’t run or try to open this file, just copy it in the folder.

Step 4

Now, remove your memory card from the Computer. Then shut-down your Android smartphone and then again insert back memory card in the phone.

Step 5

Now, enter into the Recovery Mode. For this just press the Down Volume & Home button simultaneously, and while pressing these buttons press down your Power button at the same time.

Step 6

Since you are now in the Recovery Mode, select the “install zip from SD card” option, and then select the “choose zip from SD card” option to browse into your SD Card. Now, navigate up to the downloaded “CM10.1 Android 4.2.1 Jelly Bean ROM for Samsung Galaxy S3 I9300.zip” file for flashing it on your phone.

Step 7

Now get yourself back to the main menu by pressing back button and then reboot your Android phone.

Step 8

After this, you’ll have CyanogenMod 10.1 ROM installed over your Samsung Galaxy S3 I9300.

Finished!

Available link for download

How to Install Samsung Galaxy S4 I9505 Jelly Bean Firmware I9505XXUENA1 4 3 Update Guide

How to Install Samsung Galaxy S4 I9505 Jelly Bean Firmware I9505XXUENA1 4.3 Update Guide,Download and install the latest I9505XXUENA1 4.3 Jelly Bean Firmware on Samsung Galaxy S4 GT-I9505 (Snapdragon) Smartphone. Samsung recently started rolling out an OTA update the firmware. However, the firmware is currently released only for Germany (T-Mobile). Hope the firmware will hit other part of the world soon. The Galaxy S4 I9505 was released with Android 4.2.2 Jelly Bean and receiving Android 4.3 Jelly Bean from the month of October. We have already covered many Android 4.3 Jelly Bean firmware for Galaxy S4 GT-I9505 and here we have the latest I9505XXUENA1 4.3 Jelly Bean firmware. If you yet to update your device to this latest firmware, then update the same using our simple tutorial below. Continue reading the guide to install the firmware manually through Odin. You can also check out other firmware for the device- Android 4.3 Jelly Bean for GT-I9505.

If your Galaxy S4 I9505 already running on the Android 4.3 Jelly Bean, then you can only expect few bug fixes and performance enhancement with this latest firmware update. So, want to update your Galaxy S4 I9505 to the latest XXUENA1 Android 4.3 Jelly Bean firmware? To install in official way, either you can go for OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.3 XXUENA1 firmware on your Galaxy S4 I9505 through Odin.
Must Check: Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNA6 Android 4.4.2 KitKat Firmware

Important Note:

“The firmware is released only for the Samsung Galaxy S4 GT-I9505 model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Windows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone”.

Android 4.3 Jelly Bean I9505XXUENA1 Official Firmware Download List

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build:

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power
Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
Backup important data and settings to external storage- follow this guide
Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.3 I9505XXUENA1 official firmware on Galaxy S4 I9505.

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy S4 I9505 through Odin:

How to Install Samsung Galaxy S4 I9505 Jelly Bean Firmware I9505XXUENA1 4.3 Update Guide

Download Android 4.3 XXUENA1 Firmware for Galaxy S4 I9505 from the above list
Download Odin 3.09
Switch off your phone and boot Galaxy S4 I9505 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
Now connect your Galaxy S4 I9505 to your computer via USB cable
In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9505XXDLJ5_I9505ODDDLI7_INU.tar.md5)
Now, click on the Start button to begin the installation process, wait few moments.
Once completed, you would see “PASS!” message in ID:COM port having green background
Your phone should automatically reboot after completion
You can now disconnect your phone from computer
Finish

Congratulations! your Galaxy S4 I9505 is now updated to the latest and official Android 4.3 Jelly Bean firmware. Hope you successfully completed the installation guide. If you followed everything as mentioned in the above tutorial, then your your Galaxy S4 should now running on the latest Android 4.3 Jelly Bean build version XXUENA1. You can confirm the firmware update details from Settings-About Phone. You can contact with us using the comment form below, if you find any problem with the above tutorial and download link and also share your experience with us.

Available link for download

Install video card on Lubuntu with NVIDIA chipset

I bought a new video card the other day from Zotac and I figured I would install the drivers via their website or the NVIDIA website (a downloadable file named NVIDIA-Linux-x86_64-###.##.run). WRONG!

The best way to install NVIDIA drivers is through the official Ubuntu repositories:

sudo nvidia-installer --uninstall
sudo apt-get remove nvidia* --purge
sudo update-initramfs -u
sudo apt-get install nvidia-current

For most people, that should be sufficient -- reboot and verify. If the resolution still looks off, read on...

It turns out I had black bars at the top and bottom of my screen and everything was fuzzy. It turns out the NVIDIA auto-configuration didnt detect my old monitor (SyncMaster 920nw) and its weird 1440x900 aspect ratio so I needed to do some additional tweaking.

I ran this command to generate my /etc/X11/xorg.conf file (bypassing automatic monitor detection):

sudo nvidia-xconfig --no-use-edid-dpi

I then edited the /etc/X11/xorg.conf file and added the following line to the Monitor section:

Option "DPI" "96 x 96"

I also had to change the HorizSync and VertRefresh values to (check your monitor manufacturer page to find the right values for your monitor):

HorizSync 28.0 - 80.0
VertRefresh 48.0 - 75.0

Then, in the Screen section, I had to add:

Option "IgnoreEDID" "true"

After saving the file, I rebooted and loaded the NVIDIA config tool (Start > System Tools > NVIDIA X Server Settings). In the X Server Display Configuration screen, I clicked the Resolution dropdown and chose 1440x900. Once the resolution updated and looked good, I clicked the Save to X Configuration File button.

After rebooting to verify the change persisted, I had to update my /etc/default/grub file with these lines to improve my splash screen and grub list resolution:

GRUB_GFXMODE=1024x768
GRUB_GFXPAYLOAD_LINUX=keep

(note: my BIOS video driver doesnt support 1440x900 so I just went with a decent alternative for my needs. Feel free to run sudo hwinfo --framebuffer to check your options)

In addition, I needed to create/update the /etc/initramfs-tools/conf.d/splash file to add this line:

echo FRAMEBUFFER=y

Finally, I ran these commands to apply the changes:

sudo update-initramfs -u
sudo update-grub2

I rebooted once more to verify the grub list and Lubuntu splash screen at startup looked moderately better.

...Hope this helps anyone else with an unusual setup like mine!

_______________

References:

http://ubuntuforums.org/showthread.php?t=1537225&p=9627153#post9627153
http://www.techytalk.info/lubuntu-change-fonts-dpi-when-using-proprietary-nvidia-driver/
http://www.binarytides.com/ubuntu-fix-nvidia-graphics/

Available link for download

How to Update Samsung Galaxy S Duos 2 S7582 Android 4 2 2 Jelly Bean and Install CWM Recovery

Samsung Galaxy S Duos 2 S7582 users who wish to root and install ClockworkMod Recovery (CWM) on their devices, may follow our step-by-step guide.

This tutorial uses CWM recovery released by XDA-Developers member, ahmedhameed. The CWM recovery allows Galaxy S Duos 2 users to root their devices without any difficulty.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-Requisites
1. Install USB Drivers for Samsung Galaxy S Duos 2 on your computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S Duos 2 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CWM recovery works only on the Galaxy S Duos 2 (GT-S7582). Applying this on any incorrect variant might brick the device. Verify the model number of the Galaxy S Duos 2 by selecting Settings >> About Phone.

Files Required
1. CWM (recovery.tar.md5)
2. SuperSu (UPDATE-SuperSU-v1.34.zip) or the latest version
3. Odin 3.07

Steps to Install CWM Recovery on Galaxy S Duos 2 S7582
Step 1: Extract the Odin 3.07 file using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Copy the SuperSU .zip file to the SD card of your phone.
Step 3: Switch off the Galaxy S Duos 2. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy S Duos 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 6: In Odin, click the PDA button and select the recovery.tar.md5 file. Make sure that the F. Reset Time, Auto Reboot and Re-Partition checkboxes are NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process completes, you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Steps to Root Galaxy S Duos 2 S7582 via CWM Recovery
Step 9: Boot the device into CWM recovery by pressing and holding Volume Up, Home and Power buttons together.
Step 10: In CWM recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 11: Once the installation process completes, return to main recovery menu and select "reboot system now".

Samsung Galaxy S Duos 2 S7582 running on Android 4.2.2 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Note: Many Samsung devices store a flash counter that keeps track of how many times you have flashed custom firmwares to your device. Triangle Away can be used to reset the flash counter to zero.

Screenshot: Install CWM recovery via Odin

Thanks to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Available link for download

Do You Need Windows 10 Preview Download And Install now!

Windows 10 Technical Preview is not like Windows 8 Consumer Preview, it is being released via Windows Insider program that users able to feedback and even provide private forums for discussing trouble spots with Microsoft engineers.

The Windows 10 preview is available to anyone who signs up for the Windows Insider Program. Therefore, for Windows user who wants to try out the Windows 10 Technical Preview just follow the guide below:

Sign up the program by head over to preview.windows.com and then click the “Get Started” button that will allow access to Windows 10 Technical Preview.
Register and log in using an appropriate Microsoft account.
Once finished register, Windows 10 Technical Preview will begin download. Follow the screen instruction to download the Windows 10 Technical Preview.
Note: If you’re unsure which version of Windows your PC running, right-click on the “My Computer” and select Properties. Windows edition information will be shown 32-bit or 64-bit processor under the “System type” field.
Download the Windows 10 Technical Preview install files directly from these links:
Download Windows 10 English 32-bit (2.9GB)
Download Windows 10 English 64-bit (3.8GB)
Download Windows 10 English UK 32-bit (2.94GB)
Download Windows 10 English UK 64-bit (3.79GB)
Download Windows 10 Chinese (Simplified) 32-bit (3.05GB)
Download Windows 10 Chinese (Simplified) 64-bit (3.96GB)
Download Windows 10 Portuguese (Brazil) 32-bit (2.91GB)
Download Windows 10 Portuguese (Brazil) 64-bit (3.76GB)
Write down the product key of the Technical Preview: NKJFK-GPHP7-G8C3J-P6JXR-HQRJR

Before install the program, bear in mind that the Program Services include experimental and early pre-release software, users may experience occasional crashes and in rare cases data loss. So, back up all the data before start install.

The system requirements for Windows 10 Technical Preview:

Processor: 1GHz or faster with support for PAE, NX, and SSE2
RAM: 1GB (32-bit) or 2GB (64-bit)
Hard disk space: 16GB
Graphics card: Microsoft DirectX 9 graphics device with WDDM driver

The Windows 10 Technical Preview is available in English, Chinese Simplified, and Brazilian Portuguese.

Available link for download

Pages

Tuesday, November 1, 2016

Samsung Galaxy S4 Zoom How to Install C101XWUANA1 Android 4 2 2 Jelly Bean Firmware How to Install

Important Note:

Android 4.2.2 Jelly Bean C101XWUANA1 Official Firmware Download List

Previous Firmware Build:

Pre-Requisites:

Points to be noted:

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S4 Zoom C101 through Odin:

Friday, October 28, 2016

Lubuntu 15 10 post install configuration

Thursday, October 27, 2016

Samsung Galaxy S4 Active Mini GT I8580 How to Install I8580XXUANB1 Android 4 2 2 Jelly Bean Firmware

Important Note:

Android 4.2.2 Jelly Bean I8580XXUANB1 Official Firmware Download List

Previous Firmware Build:

Pre-Requisites:

Points to be noted:

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S4 Active Mini I8580 through Odin:

Sunday, October 23, 2016

Samsung Galaxy Note 3 Neo LTE SM N7505L How to Install N7505LUBUANB1 Android 4 3 Jelly Bean Firmware

Important Note:

Android 4.3 Jelly Bean N7505LUBUANB1 Official Firmware Download List

Pre-Requisites:

Points to be noted:

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 Neo N7505L through Odin:

Friday, October 14, 2016

Samsung Galaxy Note 3 SM N900 How to Install N900XXUDNB2 Android 4 4 2 KitKat Firmware

Root N900XXUDNB2

Important Note:

Android 4.4.2 KitKat N900XXUDNB2 Official Firmware Download List

Previous Firmware Build

Pre-Requisites:

Points to be noted:

How to Update Android 4.4.2 KitKat Official Firmware on Galaxy Note 3 N900 via Odin:

Tuesday, October 11, 2016

Samsung Galaxy Win GT I8552 How to Install I8552XXANB1 Android 4 1 2 Jelly Bean Firmware

Important Note:

Android 4.1.2 Jelly Bean I8552XXANB1 Official Firmware Download List

Previous Firmware Build

Pre-Requisites:

Points to be noted:

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Win I8552 through Odin:

How to Flash Install Official Firmware on Samsung Galaxy S7 S7 Edge

Saturday, October 8, 2016

Samsung Galaxy Pop E220S Android 4 1 2 Jelly Bean Firmware How to Install E220SKSANA2 Update Guide

Important Note:

Android 4.1.2 Jelly Bean E220SKSANA2 Official Firmware Download List

Previous Firmware Build:

Pre-Requisites:

Points to be Noted:

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Pop E220S through Odin:

Friday, October 7, 2016

How to Install I9100XXLPB Android 4 0 3 Ice Cream Sandwich Upgrade for Samsung Galaxy S II

Sunday, October 2, 2016

Samsung Galaxy Mini GT S5570I How to Install S5570IAIMJ1 Android 2 3 6 Gingerbread Firmware

Important Note:

Android 2.3.6 Gingerbread S5570IAIMJ1 Official Firmware Download List

Pre-Requisites:

Points to be noted:

How to Install Android 2.3.6 Gingerbread Official Firmware on Galaxy Mini S5570I through Odin:

How to install Two instagram in to one Device

Saturday, October 1, 2016

How to Install CM10 1 android 4 2 1 Jelly Bean ROM on Samsung Galaxy S3 I9300

Disclaimer

Pre-Requisite

Steps for installing CM10.1 Android 4.2.1 Jelly Bean ROM on Samsung Galaxy S3 I9300

How to Install Samsung Galaxy S4 I9505 Jelly Bean Firmware I9505XXUENA1 4 3 Update Guide

Important Note:

Android 4.3 Jelly Bean I9505XXUENA1 Official Firmware Download List

Previous Firmware Build:

Pre-Requisites:

Points to be noted:

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy S4 I9505 through Odin:

Friday, September 30, 2016

Install video card on Lubuntu with NVIDIA chipset

How to Update Samsung Galaxy S Duos 2 S7582 Android 4 2 2 Jelly Bean and Install CWM Recovery

Tuesday, September 27, 2016

Do You Need Windows 10 Preview Download And Install now!