Click download

Android 4.2.2 Jelly Bean C101XWUANA1 Official Firmware Download List

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy S4 Zoom C101 through Odin:

1. Download Android 4.2.2 XWUANA1 Firmware for Galaxy S4 Zoom C101 from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy S4 Zoom C101 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy S4 Zoom C101 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: C101XXDLJ5_C101ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

Previous Firmware Build:

• Check battery percentage, your device should have at least 60% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

Disclaimer

Pre-Requisite

1. For successful completion of this rooting process charge your phone up to a minimum of 75% battery.
2. You must take a back-up of all your personnel items and other impotent data, such as Call Logs, SMS, Contacts, Audios, Images, Videos, APN (Access Point Names) settings, Bookmarks, MMS settings, on your phone.
3. One must install a custom recovery image particularly for his Android device. To do this, ClockworkMod Recovery should be downloaded using the Internet.
4. If you have not, then you must unlock your Android device’s Bootloader.

Steps for Flashing/Installing CM10.1 M2 Android 4.2.2 Jelly Bean JDQ39 ROM on Samsung Google Nexus 10 P8110

As the Galaxy Win released with the Android 4.1.2 Jelly Bean, you can only expect few bug fixes and performance enhancement with this update. So, want to update your Galaxy Win I8552 to the latest XXANB1 Android 4.1.2 Jelly Bean firmware? To install in official way, either you can go for  OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.1.2 XXANB1 firmware on your Galaxy Win I8552 through Odin.

Android 4.1.2 Jelly Bean I8552XXANB1 Official Firmware Download List

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Win I8552 through Odin:

1. Download Android 4.1.2 XXANB1 Firmware for Galaxy Win I8552 from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy Win I8552 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Win I8552 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: I8552XXDLJ5_I8552ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

Previous Firmware Build:

• Check battery percentage, your device should have at least 60% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

Disclaimer:

Pre-Requisite:

1. For successful completion of this rooting process charge your phone up to a minimum of 75% battery.
2. You must take a back-up of all your personnel items and other impotent data, such as Call Logs, SMS, Contacts, Audios, Images, Videos, APN (Access Point Names) settings, Bookmarks, MMS settings, on your phone.
3. One must install a custom recovery image particularly for his Android device. To do this, ClockworkMod Recovery should be downloaded using the Internet.
4. If you have not, then you must unlock your Android device’s Bootloader.

Steps for installing CM10.1 M2 Android 4.3 Jelly Bean JDQ39 ROM for LG Google Nexus 4 E960:

Disclaimer

Pre-Requisite

1. For successful completion of this rooting process charge your phone up to a minimum of 75% battery.
2. You must take a back-up of all your personnel items and other impotent data, such as Call Logs, SMS, Contacts, Audios, Images, Videos, APN (Access Point Names) settings, Bookmarks, MMS settings, on your phone.
3. One must install a custom recovery image particularly for his Android device. To do this, ClockworkMod Recovery should be downloaded using the Internet.
4. If you have not, then you must unlock your Android device’s Bootloader. But due to unlocking of Bootloader, your Android device may lose its official Warranty. So to overcome this, download fastboot from Internet.

Steps for installing CM10.1 Android 4.2.1 Jelly Bean ROM on Samsung Galaxy S3 I9300

If your Galaxy S4 I9505 already running on the Android 4.3 Jelly Bean, then you can only expect few bug fixes and performance enhancement with this latest firmware update. So, want to update your Galaxy S4 I9505 to the latest XXUENA1 Android 4.3 Jelly Bean firmware? To install in official way, either you can go for  OTA (over the air) from Settings-About Phone-Software Update or download firmware through the Samsung Kies utility. However, most of us prefer manual way to update official firmware. So, in this article you’ll find step by step manual guide to update the latest Android 4.3 XXUENA1 firmware on your Galaxy S4 I9505 through Odin.
Must Check: Samsung Galaxy Note 3 SM-N900- How to Install N900XXUDNA6 Android 4.4.2 KitKat Firmware

Android 4.3 Jelly Bean I9505XXUENA1 Official Firmware Download List

Previous Firmware Build:

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy S4 I9505 through Odin:

1. Download Android 4.3 XXUENA1 Firmware for Galaxy S4 I9505 from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy S4 I9505 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy S4 I9505 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9505XXDLJ5_I9505ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

Disclaimer

This tutorial will definitely work when using LG Google Nexus 4 E960 only. While working of it on others is not yet confirmed. On applying this installation to another model or device may give an unwanted result. While applying this update we will not be responsible if anything occurs to your device, so continue at your own risk.

Pre-Requisite

1. For successful completion of this rooting process charge your phone up to a minimum of 75% battery.
2. You must take a back-up of all your personnel items and other impotent data, such as Call Logs, SMS, Contacts, Audios, Images, Videos, APN (Access Point Names) settings, Bookmarks, MMS settings, on your phone.
3. One must install a custom recovery image particularly for his Android device. To do this, ClockworkMod Recovery should be downloaded using the Internet.
4. If you have not, then you must unlock your Android device’s Bootloader.

Steps for installing CM10.1 M2 Android 4.2.2 Jelly Bean JDQ39 ROM for LG Google Nexus 4 E960

Important Note:

Pre-Requisites:

Points to be noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

If your Galaxy Core LTE G386F already running on Android 4.2.2 Jelly Bean, then you can only expect few bug fixes and performance enhancement with this latest firmware update.

Android 4.2.2 Jelly Bean G386FXXUANB4 Official Firmware Download List

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Core LTE G386F through Odin:

1. Download Android 4.2.2 XXUANB4 Firmware for Galaxy Core LTE G386F from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy Core LTE G386F into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Core LTE G386F to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: G386FXXDLJ5_G386FODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

• Check battery percentage, your device should have at least 60% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.