Click download

Important Note:

Android 4.3 Jelly Bean N7505LUBUANB1 Official Firmware Download List

Pre-Requisites:

• Check battery percentage, your device should have at least 60% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 Neo N7505L through Odin:

1. Download Android 4.3 UBUANB1 Firmware for Galaxy Note 3 Neo N7505L from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy Note 3 Neo N7505L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Note 3 Neo N7505L to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7505LXXDLJ5_N7505LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

Important Note:

Android 4.3 Jelly Bean N7500QXXUANB1 Official Firmware Download List

Pre-Requisites:

• Check battery percentage, your device should have at least 60% battery power
• Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
• Backup important data and settings to external storage- follow this guide
• Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

How to Install Android 4.3 Jelly Bean Official Firmware on Galaxy Note 3 Neo N7500Q through Odin:

1. Download Android 4.3 XXUANB1 Firmware for Galaxy Note 3 Neo N7500Q from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy Note 3 Neo N7500Q into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Note 3 Neo N7500Q to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: N7500QXXDLJ5_N7500QODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

warring : before you give handset to repair shop or new handset, please try the following procedure to Repair your device. Frist charge your battery more then 75%. backup your important Data like Phone-book, message,email,image,and setting and in most cases take out sim card and SD card. after doing hard reset not possible to recover your data, so online backup is always important. for all of your data, a backup should be Done. on a external device, hard drive raid system media or SD card.

 Samsung Galaxy S5 Hard Reset | factory Reset

samsung galaxy s5 hard reset

1. First turn off the phone by using the Power key

2. Afterwards press and hold together Volume Up + Home + Power button, 

4. Then select  "wipe data / factory reset" using Volume buttons to navigate and Power button to confirm

5. Choose Yes -delete all user data to confirm the whole operation.

6. In tha next step select option "reboot system now"

7. Well Done The Hard Reset has just been performed.

Steps 2 : Factory Reset

1. Switch on Samsung Galaxy S5 

2. Make sure Samsung Galaxy S5 G930F battery is charged completely

3. Go to Menu > Setting > Backup & Reset > Factory data reset > Reset device

4. Select Erase Everything

5. Then Samsung Galaxy S5 G930F  will complete the process

samsung s5 factory reset,samsung s5 master reset,samsung s5 hard reset code,samsung s5 hard reset,how to samsung s5 hard reset,how to samsung s5 factory reset,samsung galaxy s5 G930F factory reset,samsung galaxy s5 G930F master reset,samsung galaxy s5 G930F hard reset,samsung galaxy  G930F factory reset,samsung galaxy  G930F master reset,samsung galaxy  G930F hard reset,samsung galaxy s5 g900f hard reset,samsung galaxy s5 g900h hard reset,samsung galaxy s5 g900 hard reset,samsung galaxy s5 g900a hard reset,samsung galaxy s5 sm g900f hard reset,samsung galaxy s5 sm-g900h hard reset,

Android 4.2.2 Jelly Bean I9168ZMUANB2 Official Firmware Download List

Previous Firmware Build

How to Install Android 4.2.2 Jelly Bean Official Firmware on Galaxy Grand Neo I9168 through Odin:

1. Download Android 4.2.2 ZMUANB2 Firmware for Galaxy Grand Neo I9168 from the above list
2. Download Odin 3.09
3. Switch off your phone and boot Galaxy Grand Neo I9168 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Grand Neo I9168 to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
9. In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9168XXDLJ5_I9168ODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish